PROLESKI PRO3-7x9.1 Indoor Ski Simulator — Optimal Series
PRO3-7x9.1 is a commercial indoor ski simulator for three-person lessons. Its 9100 × 7000 mm working surface and fixed incline make it a candidate for ski schools and year-round indoor leisure businesses. Compare its installation requirements with your room and planned session format.
PRO3-7x9.1 Fixed-Incline Ski Training
The Widest Three-Person PRO3 Configuration. Plan your three-person coaching programme around a 7000 mm-wide working surface. This configuration prioritises transverse training space while retaining the 9100 mm working length used by the other PRO3 variants.
- Why choose PRO3-7x9.1: Choose this model when your venue can accommodate the 8010 mm minimum installation width. Compared with the 6500 mm variant, you gain 500 mm of working width, rather than an additional regular user.
- Optimal training advantage: The fixed 13.5° incline gives instructors a consistent slope for repeatable sessions. Choose Optimal when your programme uses a fixed platform angle and adjusts exercises through coaching and belt speed. If changing steepness during a lesson is essential, compare Vertical.
- Plan the lesson format: the specification lists 3 regular users and 12 participants in “School for Beginners” mode. These are different operating formats; use the relevant capacity when planning sessions.
Discuss PRO3-7x9.1 for your venue — share your room dimensions and intended lesson format so we can assess the configuration with you.
Safety & Control Equipment
PRO3-7x9.1 includes safety and control systems. Confirm the current configuration, surface maintenance requirements and operating procedures in the model specification before use.
Ski Surface & 36-Month Warranty
PROLESKI provides a 36-month warranty on PRO3-7x9.1, including its surface covering. Coverage begins when the customer signs the acceptance documents, under the agreed warranty terms.
Training Features & Configuration
- Working surface: 9100 × 7000 mm.
- Minimum installation area: 11492 × 8010 mm (length × width).
- Ceiling height at 13.5° platform incline: 4.76 m.
- Belt speed: 25 km/h as standard, 35 km/h optional.
Compare these installation dimensions with your room before selecting the model.
Installation & Maintenance Support
Plan your PRO3-7x9.1 installation with the manufacturer. PROLESKI supports layout planning, installation, instructor training and maintenance to help your team prepare for launch and ongoing operation.
Request a quote for your venue with your city and country, room dimensions, intended use and preferred options.
PRO3-7x9.1 Specifications & Installation Requirements
| # | SPECIFICATION | PRO3-7x9.1 |
|---|---|---|
| 1 | Capacity, persons | 3 |
| 2 | Capacity in "School for Beginners" mode, persons | 12 |
| 3 | Working length, mm | 9100 |
| 4 | Working width, mm | 7000 |
| 5 | Ceiling height for a platform tilt of 13.5°, m | 4.76 |
| 6 | Lower platform height (podium or pit), mm | 740 |
| 7 | Mounting area length, at least … mm | 11492 |
| 8 | Mounting area width, at least … mm | 8010 |
| 9 | Elevation, degrees (X – incline; Y – lateral incline) | X: +13.5° |
| 10 | Maximum speed of the band motion, basic (option), km/h | 25 (35) |
| 11 | Average electrical energy consumption over 1 hour, kWh | 16.4 |
| 12 | Average water consumption, liter/hour | ≥ 45 |
Explore simulator options for your PRO3-7x9.1 project.
