PROLESKI PRO1 CROSS FIT Cross-Country Ski Simulator — Cross Series
PRO1 CROSS FIT brings year-round uphill and downhill practice to cross-country ski and biathlon training centres. Its 4500 × 3000 mm surface is recommended for two skiers, excluding the coach, with 170 cm skis.
PRO1 CROSS FIT Cross-Country Ski Training
Cross-country training with a −3° to +15° incline range. Electric cylinders change the platform incline during operation, and belt speed reaches 45 km/h.
CROSS FIT includes a remote control; a safety suspension system and automatic braking zones are listed as options.
Safety & Control Equipment
The specification below lists the safety and control features for the PRO1 CROSS FIT. Request the current equipment list to confirm the supplied wetting and control options before installation.
Ski Surface & 36-Month Warranty
PROLESKI provides a 36-month warranty on PRO1 CROSS FIT, including its surface covering. Coverage begins when the customer signs the acceptance documents, under the agreed warranty terms.
Training Features & Configuration
- Working surface: 4500 × 3000 mm.
- Minimum installation area: 5730 × 4665 mm (length × width).
- Recommended ceiling height at maximum incline: 3.5 m.
Choose this model by comparing the control and safety equipment for your coaching programme.
Installation & Maintenance Support
Plan your PRO1 CROSS FIT installation with the manufacturer. PROLESKI supports layout planning, installation, instructor training and maintenance to help your team prepare for launch and ongoing operation.
Request a quote for your venue with your city and country, room dimensions, intended use and preferred options.
PRO1 CROSS FIT Specifications & Installation Requirements
| # | SPECIFICATION | PRO1 CROSS FIT |
|---|---|---|
| 1 | Recommended number of skiers, excluding the coach (170 cm skis) | 2 |
| 2 | Working length, mm | 4500 |
| 3 | Working width, mm | 3000 |
| 4 | Lifting mechanism type | electric cylinders |
| 5 | Inclination angle, ° | V: -3° +15°; general motion 18° |
| 6 | Maximum belt speed (standard/option), km/h | 45 |
| 7 | Incline adjustment speed, °/s | 2°/s |
| 8 | Incline adjustment acceleration | From 0.5°/s² |
| 9 | Recommended ceiling height at maximum incline, m | 3,5 |
| 10 | Overall width, mm | 4636 |
| 11 | Overall length (changes connected with the p. 5), mm | 5500 .. 5630 |
| 12 | Height of the upper platform, mm (changes in accordance with p.5) | -218 .. 1270 |
| 13 | Height of the lower platform, mm | 700 |
| 14 | Minimum installation width, mm | 4665 |
| 15 | Minimum installation length, mm | 5730 |
| 16 | Weight, kg | 5000 |
| 17 | Load distribution and number of bearing plates | 4 |
| 18 | Electrical power (operating/maximum), kW | 3/ 20 kW |
| 19 | Frame finish | powder painting or zincing |
| 20 | Handrails | stainless steel |
| 21 | Starting plank | — |
| 22 | Working covering | plain |
| 23 | Lead and driven shafts | rubber covered |
| 24 | Band stabilization system | automatic |
| 25 | Gradual speed control | + |
| 26 | Standing control board | + |
| 27 | Future standing control panel | option |
| 28 | Remote control | + |
| 29 | Ski surface speed adjustment | option |
| 30 | Automatic wetting water feed | — |
| 31 | Indication panel LCD V km/h, S km, t minutes | 19,5″ with angle indication |
| 32 | Brake unit for emergency stop | + |
| 33 | Automatic braking zones | option |
| 34 | Protective mat | — |
| 35 | Safety suspension system | option |
| 36 | Mirrors stand | option |
| 37 | Automatic maintenance system | option |
| 38 | Statistics and billing system PROLESKI | option |
| 39 | Slopes programming system | option |
| 40 | Ergospirometry system | option |
| 41 | 8D Vision System | — |
| 42 | Lubrication concentrate PROLESKI | |
| 43 | Adjustable incline response | option |
| 44 | Qualified training of instructors | — |
| 45 | Function Transformation –> Direction | — |
| 46 | Automatic adjustment of the upper platform in horizontal position | — |
| 47 | Walk way for the operator is 800 mm + working place of the operator + additional backup control panel | — |
