PROLESKI PRO3 Indoor Ski Simulator — Optimal Series
PRO3 is a commercial indoor ski simulator for three-person lessons. Its 9100 × 4650 mm working surface and fixed incline make it a candidate for ski schools and year-round indoor leisure businesses. Compare its installation requirements with your room and planned session format.
PRO3 Fixed-Incline Ski Training
Three-Person Sessions with Standard Working Width. Develop small-group ski and snowboard lessons around three simultaneous users. The 9100 mm working length supports the three-person format while the 4650 mm width helps preserve floor space compared with wider PRO3 configurations.
- Why choose PRO3: Choose this model when three-person lessons are required and available room width is a key constraint. Compare a wider variant when additional transverse working space matters more than installation width.
- Optimal training advantage: The fixed 13.5° incline gives instructors a consistent slope for repeatable sessions. Choose Optimal when your programme uses a fixed platform angle and adjusts exercises through coaching and belt speed. If changing steepness during a lesson is essential, compare Vertical.
- Plan the lesson format: the specification lists 3 regular users and 9 participants in “School for Beginners” mode. These are different operating formats; use the relevant capacity when planning sessions.
Discuss PRO3 for your venue — share your room dimensions and intended lesson format so we can assess the configuration with you.
Safety & Control Equipment
PRO3 includes safety and control systems. Confirm the current configuration, surface maintenance requirements and operating procedures in the model specification before use.
Ski Surface & 36-Month Warranty
PROLESKI provides a 36-month warranty on PRO3, including its surface covering. Coverage begins when the customer signs the acceptance documents, under the agreed warranty terms.
Training Features & Configuration
- Working surface: 9100 × 4650 mm.
- Minimum installation area: 11222 × 5660 mm (length × width).
- Ceiling height at 13.5° platform incline: 4.76 m.
- Belt speed: 25 km/h as standard, 35 km/h optional.
Compare these installation dimensions with your room before selecting the model.
Installation & Maintenance Support
Plan your PRO3 installation with the manufacturer. PROLESKI supports layout planning, installation, instructor training and maintenance to help your team prepare for launch and ongoing operation.
Request a quote for your venue with your city and country, room dimensions, intended use and preferred options.
PRO3 Specifications & Installation Requirements
| # | SPECIFICATION | PRO3 |
|---|---|---|
| 1 | Capacity | 3 |
| 2 | Capacity in "School for Beginners" mode. | 9 |
| 3 | Working length, mm | 9100 |
| 4 | Working width, mm | 4650 |
| 5 | Ceiling height for a platform tilt of 13.5°, m | 4.76 |
| 6 | Lower platform height (podium or pit), mm | 640 |
| 7 | Mounting area length, at least … mm | 11222 |
| 8 | Mounting area width, at least … mm | 5660 |
| 9 | Elevation, degrees (X – incline; Y – lateral incline) | X: +13,5° |
| 10 | Maximum speed of the band motion, basic (option), km/h | 25 (35) |
| 11 | Average electrical energy consumption over 1 hour, kWh | ≥ 8 |
| 12 | Average water consumption, liter/hour | ≥ 30 |
Explore simulator options for your PRO3 project.
What Our Customers Say
“We wanted something that would keep our members skiing between seasons, and the PRO3 did exactly that. Installation went smoothly, the PROLESKI team stayed in touch the whole time, and our instructors were confident on it within days. Highly recommended.”“Honestly? I was sceptical that a simulator could feel like real skiing. Then I got on it. Our clients now book sessions back-to-back, and beginners who start here arrive at the mountains already knowing what to do. Best investment we made this year.”