PROLESKI PRO2D Indoor Ski Simulator — Direction Series
PRO2D is a commercial indoor ski simulator for paired lessons. Its 6000 × 4650 mm working surface and dynamic two-axis inclination make it a candidate for ski schools and sports venues with terrain-adaptation training programmes. Compare its installation requirements with your room and planned session format.
PRO2D Two-Axis Ski Training
Dynamic Two-Axis Training for Paired Sessions. Offer a two-person lesson format with simultaneous changes in longitudinal and lateral platform inclination. PRO2D suits ski schools and sports venues that want to practise adapting to changing slope geometry, rather than varying belt speed or steepness alone.
- Why choose PRO2D: Choose PRO2D when two-axis movement is part of your training programme and paired sessions meet your needs. Its 8810 mm minimum installation length is shorter than PRO3D’s 11835 mm requirement.
- Direction training advantage: Longitudinal incline from +10° to +22° and lateral incline of −5°/+5° allow instructors to vary slope geometry within a session. These controls are useful when adapting to changing terrain is a specific training goal.
- Plan the lesson format: the specification lists 2 regular users and 6 participants in “School for Beginners” mode. These are different operating formats; use the relevant capacity when planning sessions.
Discuss PRO2D for your venue — share your room dimensions and intended lesson format so we can assess the configuration with you.
Safety & Control Equipment
The PRO2D includes safety and control systems. Confirm the current configuration and operating requirements in the model specification before installation.
Ski Surface & 36-Month Warranty
PROLESKI provides a 36-month warranty on PRO2D, including its surface covering. Coverage begins when the customer signs the acceptance documents, under the agreed warranty terms.
Training Features & Configuration
- Working surface: 6000 × 4650 mm.
- Minimum installation area: 8810 × 6100 mm (length × width).
- Ceiling height at 22° platform incline: 5.5 m.
- Belt speed: 25 km/h as standard, 35 km/h optional.
Choose Direction when your coaching programme needs lateral tilt as well as changing slope steepness.
Installation & Maintenance Support
Plan your PRO2D installation with the manufacturer. PROLESKI supports layout planning, installation, instructor training and maintenance to help your team prepare for launch and ongoing operation.
Request a quote for your venue with your city and country, room dimensions, intended use and preferred options.
PRO2D Specifications & Installation Requirements
| # | SPECIFICATION | PRO2D |
|---|---|---|
| 1 | Capacity | 2 |
| 2 | Capacity in "School for Beginners" mode. | 6 |
| 3 | Working length, mm | 6000 |
| 4 | Working width, mm | 4650 |
| 5 | Ceiling height for a platform tilt of 22°, m | 5.5 |
| 6 | Lower platform height (podium or pit), mm | 850 |
| 7 | Mounting area length, at least … mm | 8810 |
| 8 | Mounting area width, at least … mm | 6100 |
| 9 | Lifting mechanism type | Electric cylinder (ball screw drive) |
| 10 | Elevation, degrees (X – incline; Y – lateral incline) | X: +10°…+22°; Y:-5°/+5° |
| 11 | Tilt change speed, degrees / sec. | 1°/s |
| 12 | Tilt angle acceleration, °/s² | 0.8°/s² |
| 13 | Maximum speed of the band motion, basic (option), km/h | 25 (35) |
| 14 | Average electrical energy consumption over 1 hour, kWh | ≥ 6 |
| 15 | Average water consumption, liter/hour | ≥ 30 |
Explore simulator options for your PRO2D project.
What Our Customers Say
“We run a busy training centre and needed equipment that could handle intensive daily use. The PRO2D has done that without problems. Our coaches appreciate the precision, our clients appreciate the experience. A reliable partner and a reliable product.”