PRO2V


PROLESKI PRO2V indoor ski simulator (infinite slopes)

Can be used at fitness centers, sport clubs, entertainment and shopping centers, mountain skiing schools, education and sport establishments.

trenajer-animation-UP-DOWN

Technical characteristics

# Specification dynamic models
series Vertical
PRO2V
1 Recommended number of skiers without including coach, for comfort skiing with the skis with length of 170 sm 2
2 Working length, mm 6000
3 Working width, mm 4650
4 Lifting mechanism type    electric cylinders
5 Inclination angle, ° V: +8° +23°
6 Maximum speed of the moving band basic/option km/h 35
7 Speed of inclination switching, deg./sec. 2°/s
8 Speeding up of the inclinationangle switchint is basic and set up to, m/s2 1 m/s2
9 Recommended height of the ceiling at the maximum lifting, m 5,5
10 Overall width, mm 5570
11 Overall length (changes connected with the p. 5), mm 7684 .. 8124
12 Height of the upper platform, mm (changes in accordance with p.5) 1770 .. 3448
13 Height of the lover platform, mm 950
14 Width of the mounting spot, not less than 5770
15 Length of the mounting spot, not less than 8225
16 Weight, kg 5000
17 Load distribution and number of bearing plates 3
18 Power consumption (working/max.), kW/h 6/ 29 kW
19 Framework, processing powder painting or zincing
20 Handrails aluminium with wooden plate (beech)
21 Starting plank stainless steel
22 Working covering covering with the pile height 23 mm
23 Lead and driven shafts rubber covered
24 Band stabilization system automatic
25 Gradual speed control +
26 Standing control board +
27 Standing control board Future option
28 Remote control +
29 Ski carpet speed up adjustment option
30 Automatic wetting water feed +
31 Indication panel LCD V km/h, S km, t minutes 19,5″
32 Break unit for quick stop +
33 Zones of automatic break +
34 Protective mat +
35 Safety suspention system option
36 Mirrors stand option
37 Automatic maintenance system option
38 Statistics and billing system PROLESKI option
39 Slopes programming system
40 Ergospirometry system
41 8D Vision System
42 Lubrication concentrate PROLESKI option
43 Function «realness» /speeding up of the inclination angle switching can be regulated up to 10 m/s2 option
44 Qualified training of instructors option
45 Function Transformation –> Direction  option –> Direction
46 Automatic adjustment of the upper platform in horizontal position
47 Walk way for the operator is 800 mm + working place of the operator + additional backup control panel

Our company produces skis simulators PROLESKI in very different modifications and different complexity levels. If basic static series of the endless slopes has fixed tilt angle, then series Vertical equipped with the lift drives on the electric cylinders, which allows in the dynamic mode change band tilt angle. Starting and ending tilt angles can be changed and are set out at the stage of the specific simulator engineering.

Model of the series Vertical PRO2V allows to simultaneously skiing of two people at the same time and will perfectly fit for those, who want to improve skiing skills on the alpine skis. An integral part of any ski simulator PROLESKI, including PRO2V is safety system: emergency shutdown system, safety railing of the simulator perimeter, sports mat at the upper part and side fixed paths for having rest.

At the engineering of the simulators PROLESKI we always implement most current achievements in the relevant areas and are using only high-quality materials from the leading manufacturers: SKF, ABB, Lenze etc. «Endless» band of the ski simulator is covered with the special pile for improving of the sliding parameters. This covering has high resistance to abrasion and has proof of strength for 5000 hours of continuous operation. If it will be required, covering can be wetted by the special solution using automatic overspray system.

Model of the endless slope PROLESKI PRO2V is packaged with fixed control board for monitoring of the simulator operation.