PROLESKI PRO2V+ indoor ski simulator (infinite slopes)

Can be used at fitness centers, sport clubs, entertainment and shopping centers, mountain skiing schools, education and sport establishments.


Technical characteristics

# Specification dynamic models
series Vertical
1 Recommended number of skiers without including coach, for comfort skiing with the skis with length of 170 sm 2
2 Working length, mm 7500
3 Working width, mm 4650
4 Lifting mechanism type    electric cylinders
5 Inclination angle, ° V: +8° +23°
6 Maximum speed of the moving band basic/option km/h 35
7 Speed of inclination switching, deg./sec. 2°/s
8 Speeding up of the inclinationangle switchint is basic and set up to, m/s2 1 m/s2
9 Recommended height of the ceiling at the maximum lifting, m 6
10 Overall width, mm 5570
11 Overall length (changes connected with the p. 5), mm 9060 .. 9610
12 Height of the upper platform, mm (changes in accordance with p.5) 1980 .. 4000
13 Height of the lover platform, mm 950
14 Width of the mounting spot, not less than 5770
15 Length of the mounting spot, not less than 9710
16 Weight, kg 5500
17 Load distribution and number of bearing plates 3
18 Power consumption (working/max.), kW/h 6/ 29 kW
19 Framework, processing powder painting or zincing
20 Handrails aluminium with wooden plate (beech)
21 Starting plank stainless steel
22 Working covering covering with the pile height 23 mm
23 Lead and driven shafts rubber covered
24 Band stabilization system automatic
25 Gradual speed control +
26 Standing control board +
27 Standing control board Future option
28 Remote control +
29 Ski carpet speed up adjustment option
30 Automatic wetting water feed +
31 Indication panel LCD V km/h, S km, t minutes 19,5″
32 Break unit for quick stop +
33 Zones of automatic break +
34 Protective mat +
35 Safety suspention system option
36 Mirrors stand option
37 Automatic maintenance system option
38 Statistics and billing system PROLESKI option
39 Slopes programming system
40 Ergospirometry system
41 8D Vision System
42 Lubrication concentrate PROLESKI option
43 Function «realness» /speeding up of the inclination angle switching can be regulated up to 10 m/s2 option
44 Qualified training of instructors option
45 Function Transformation –> Direction  option –> Direction
46 Automatic adjustment of the upper platform in horizontal position
47 Walk way for the operator is 800 mm + working place of the operator + additional backup control panel

Unlike steady-state models of the ski simulators PROLESKI, where tilt angle of the moving band is constantly fixed, in the dynamic model PRO2V+ of the series Vertical moving band can dynamically change tilt angle. It is reached to the account of using of the lifting mechanisms on the electric jacks. At the stage of engineering, there can be in advance defined range of the angles tilt changing on the moving band.

Model of the endless slope PRO2V+ there is extended base compared with the previous model and perfectly fits for the simultaneous trainings of 2 people. In the best possible way, this type of simulator fits those who already has definite skiing experience on the alpine skis and would like to improve their skills. Safety of this model, usually, at the height — ski simulator is equipped with the emergency shutdown system, side static paths, protective mat at the upper pert and perimeter fencing.

Our company pays special attention to the quality of the used materials for manufacturing of the ski simulators. These materials we purchase from the most well known manufacturers: SKF, ABB, Lenze etc. Sliding on the band, is maximum approximated to the real conditions, is reached to the account of the special covering, that is temper proofed and may be operated up to 5000 hours in the continuous mode. Additionally, for sliding performance improvement, covering can be moistened with special concentrate using automatic overspray system.

List of equipment of single order of the endless slope PROLESKI PRO2V+ includes fixed board DN for controlling of the simulator operation by the coach -consultant.