PRO1V


PROLESKI PRO1V indoor ski simulator (infinite slopes)

Can be used at fitness centers, sport clubs, entertainment and shopping centers, mountain skiing schools, education and sport establishments.

trenajer-animation-UP-DOWN

Technical characteristics

# Specification dynamic models
series Vertical
PRO1V
1 Recommended number of skiers without including coach, for comfort skiing with the skis with length of 170 sm 1
2 Working length, mm 3100
3 Working width, mm 4650
4 Lifting mechanism type    electric cylinders
5 Inclination angle, ° V: +8° +23°
6 Maximum speed of the moving band basic/option km/h 35
7 Speed of inclination switching, deg./sec. 2,5°/s
8 Speeding up of the inclinationangle switchint is basic and set up to, m/s2 1 m/s2
9 Recommended height of the ceiling at the maximum lifting, m 4,5
10 Overall width, mm 5570
11 Overall length (changes connected with the p. 5), mm 5029 .. 5252
12 Height of the upper platform, mm (changes in accordance with p.5) 1368 .. 2355
13 Height of the lover platform, mm 950
14 Width of the mounting spot, not less than 5770
15 Length of the mounting spot, not less than 5350
16 Weight, kg 4500
17 Load distribution and number of bearing plates 3
18 Power consumption (working/max.), kW/h 3,5/ 25 kW
19 Framework, processing powder painting or zincing
20 Handrails aluminium with wooden plate (beech)
21 Starting plank stainless steel
22 Working covering covering with the pile height 23 mm
23 Lead and driven shafts rubber covered
24 Band stabilization system automatic
25 Gradual speed control +
26 Standing control board +
27 Standing control board Future option
28 Remote control +
29 Ski carpet speed up adjustment option
30 Automatic wetting water feed +
31 Indication panel LCD V km/h, S km, t minutes 19,5″
32 Break unit for quick stop +
33 Zones of automatic break +
34 Protective mat +
35 Safety suspention system option
36 Mirrors stand option
37 Automatic maintenance system option
38 Statistics and billing system PROLESKI option
39 Slopes programming system
40 Ergospirometry system
41 8D Vision System
42 Lubrication concentrate PROLESKI option
43 Function «realness» /speeding up of the inclination angle switching can be regulated up to 10 m/s2 option
44 Qualified training of instructors option
45 Function Transformation –> Direction  option –> Direction
46 Automatic adjustment of the upper platform in horizontal position
47 Walk way for the operator is 800 mm + working place of the operator + additional backup control panel

Simple static models of the alpine ski simulators PROLESKI are produced with the stationary tilt angle of the moving band. Dynamic models of the line Vertical are different so that, for them there is provided possibility of the dynamic regulation of the band tilt angle using lift drives on the electric cylinders. Maximum and minimum angles of the band tilting may have different and are set out at the stage of engineering of the ski simulator. Basic model of this line — PRO1V is designed for skiing of one person.

Endless slope PROLESKI PRO1V is provided first of all for those, who would like to rise to the new level already existing skills in alpine skiing. As always we have provided high level of safety for skiers: ski simulator is equipped with the safety hand-rails, cushioned mat, immovable paths on the sides of the moving band and emergency shutdown system.

Availability of the lifting mechanisms has higher requirements for the reliability of all construction and endless slope PROLESKI PRO1V is designed with consideration of the most current achievements in the simulators manufacturing. In its production there are only high-quality materials applied SKF, ABB, Lenze etc. Covering of the band with special pile is provided for enabling of the required sliding and maintains up to 5000 hours in the mode of the continuous operation. We have developed special liquid for wetting of the band covering using automatic feed system.

Manipulation of the ski simulator is carried out with help of the fixed remote control board, which is supplied as part of the set.