PRO1


Endless slopes indoor — ski simulator — infinite slopes PROLESKI PRO1

Can be used in private houses, fitness centers, and sport clubs.

P-1

Technical characteristics

# Specification static models
series Optimal
PRO1
1 Recommended number of skiers without including coach, for comfort skiing with the skis with length of 170 sm 1
2 Working length, mm 3100
3 Working width, mm 4650
4 Lifting mechanism type no
5 Inclination angle, ° 13,5°
6 Maximum speed of the moving band basic/option km/h 25
7 Speed of inclination switching, deg./sec.
8 Speeding up of the inclinationangle switchint is basic and set up to, m/s2
9 Recommended height of the ceiling at the maximum lifting, m 3,5
10 Overall width, mm 5570
11 Overall length (changes connected with the p. 5), mm 5275
12 Height of the upper platform, mm (changes in accordance with p.5) 1340
13 Height of the lover platform, mm 636
14 Width of the mounting spot, not less than 5670
15 Length of the mounting spot, not less than 5182
16 Weight, kg 3800
17 Load distribution and number of bearing plates 4
18 Power consumption (working/max.), kW/h 3,5/ 18 kW
19 Framework, processing  zinc plating
20 Handrails aluminium with wooden plate (beech)
21 Starting plank stainless steel
22 Working covering covering with the pile height 23 mm
23 Lead and driven shafts rubber covered
24 Band stabilization system automatic
25 Gradual speed control +
26 Standing control board +
27 Standing control board Future option
28 Remote control +
29 Ski carpet speed up adjustment
30 Automatic wetting water feed +
31 Indication panel LCD V km/h, S km, t minutes option
32 Break unit for quick stop +
33 Zones of automatic break +
34 Protective mat +
35 Safety suspention system option
36 Mirrors stand   option
37 Automatic maintenance system
38 Statistics and billing system PROLESKI option
39 Slopes programming system
40 Ergospirometry system
41 8D Vision System
42 Lubrication concentrate PROLESKI option
43 Function «realness» /speeding up of the inclination angle switching can be regulated up to 10 m/s2
44 Qualified training of instructors option
45 Function Transformation –> Direction
46 Automatic adjustment of the upper platform in horizontal position
47 Walk way for the operator is 800 mm + working place of the operator + additional backup control panel

Model of the ski simulator PRO1 — is the low-end model in the line of the endless slopes PROLESKI that is provided for 1 skier. As all other modifications, PRO1 is developed and produced with consideration of the international achievements in field of ski simulators. During manufacturing, we apply most current materials of European suppliers that by time have proved their reliability and quality. In this, raw it is also possible to mention SKF, ABB, Lenze, including parts.

Our ski simulators, including model PRO1, shall without fail be equipped by the safety features, that have multilayer structure. Besides this, each model has automatic system of the surface processing by the special wetting reagents. Operational management of the attraction is carried out with help of the control board (two variants – fixed and radio).

Most important characteristic of the ski simulator is quality of its covering. Our company with special carefulness approaches to selection of the composite materials, using which pile for the covering is produced. In the model of endless band PRO1 there is covering applied, that is designed for continuous operation during 5000 hours. We are supporting warranty for the covering during 24 months.

Ski simulator PRO1 is absolutely does not assent to its foreign analogues, by many parameters even exceeds them, besides this price od such attraction is lower of these analogues.

Considering that endless slope PRO1 is a high-end technology, we are providing all informational and technical customer care, including recommendations on the business management, including opening of the turnkey business and franchising.