PROLESKI PRO2D indoor ski simulator (infinite slopes)

Can be used at fitness centers, sport clubs, entertainment and shopping centers, mountain skiing schools, education and sport establishments.

trenajer-animation-2 proleski-pro3d

Slope speed is shown for description only.

In reality the slope speed is adjusted smoothly at a given speed.

PRO2D model is designed for simultaneous training of up to 2 people.

Technical characteristics

# Specification dynamic models
series Direction
1 Recommended number of skiers without including coach, for comfort skiing with the skis with length of 170 sm 2
2 Working length, mm 6000
3 Working width, mm 4650
4 Lifting mechanism type   electric cylinders
5 Inclination angle, ° V: +8° +23°, H: +/-10°
6 Maximum speed of the moving band basic/option km/h 35/40
7 Speed of inclination switching, deg./sec. 2°/s
8 Speeding up of the inclinationangle switchint is basic and set up to, m/s2 1 m/s2
9 Recommended height of the ceiling at the maximum lifting, m 5,5
10 Overall width, mm 5570
11 Overall length (changes connected with the p. 5), mm 7684 .. 8124
12 Height of the upper platform, mm (changes in accordance with p.5) 1770 .. 3448
13 Height of the lover platform, mm 950
14 Width of the mounting spot, not less than 6930
15 Length of the mounting spot, not less than 6965
16 Weight, kg 5000
17 Load distribution and number of bearing plates 3
18 Power consumption (working/max.), kW/h 6/ 29 kW
19 Framework, processing powder painting or zincing
20 Handrails aluminium with wooden plate (beech)
21 Starting plank stainless steel
22 Working covering covering with the pile height 23 mm
23 Lead and driven shafts rubber covered
24 Band stabilization system automatic
25 Gradual speed control +
26 Standing control board +
27 Standing control board Future option 
28 Remote control +
29 Ski carpet speed up adjustment option
30 Automatic wetting water feed +
31 Indication panel LCD V km/h, S km, t minutes 19,5″
32 Break unit for quick stop +
33 Zones of automatic break +
34 Protective mat +
35 Safety suspention system option
36 Mirrors stand option
37 Automatic maintenance system option
38 Statistics and billing system PROLESKI option
39 Slopes programming system option
40 Ergospirometry system option
41 8D Vision System option
42 Lubrication concentrate PROLESKI option
43 Function «realness» /speeding up of the inclination angle switching can be regulated up to 10 m/s2 option
44 Qualified training of instructors option
45 Function Transformation –> Direction  —
46 Automatic adjustment of the upper platform in horizontal position
47 Walk way for the operator is 800 mm + working place of the operator + additional backup control panel

To reach maximum reality during skiing on the ski simulator PROLESKI, or company designed line of simulators Direction, models of which can change tilting angles of the moving band in the vertical direction and horizontal direction in the dynamic mode. Modification of the endless slope PRO2D is designed for simultaneous skiing of 2 people and will perfectly fit even those who already have sufficient experience of skiing on the alpine skis.

Nobody is fail-safe, that is why our company has taken care of the high safety level of the endless slopes PROLESKI. We have emergency shutdown system of the band, no movable parts of it on sides, cushioned mat at the upper part and rails system at the simulator perimeter.

In construction of ski simulator PRO2D there are high-quality materials used of the leading manufacturers: SKF, ABB, Lenze etc., and their reliability is proved by the years of the effective operation.

Additional realness of skiing is reached by means of using special pile as a covering of the moving band. This covering has high stability to abrasion and its term of the continuous operation is 5000 hours. We are sure in the quality of the covering materials and provide for it warranty of 24 months.

During all the term of operation of the ski simulator RPO2D, we carry out its maintenance work including post-warranty servicing on the contractual basis.